This automation Kit is for standard single leaf swing gates,of 2-meters and up to 5-meter-long wings. maximum recomended wing wight  - 250Kg.

This Kit powered by Mains power, and including:

• One (1) ram motor Unit.
• One (1) digital control Box Star-G8, including transformer and receiver.
• Two(2)  remote-control Units.
• One (1) wing Brackets ready to bolt or weld on a gate.
• One (1) post Brackets ready to bolt or weld on a post/ wall.
• One (1) manual release Key.
• One (1) detailed Installation manual.
• Allegro technical support.
• Allegro and KingGates 3 Years Warranty on main items, Motors and control box.

​

Installation

• The motor can be mounted above the driveway level
• Please see the geometry, and mountinh position requirements in the installation book.
• Minimum one set of Infrared safety required when choosing automatic closing setup (oppose to open/stop/close mode)
• The Electric lock recommended for gate of more than 2.2M long

What’s not included in the Kit

• Bolts to fit the bracket on gate and post/wall not included
• Flexible Cable 2x1.5MM from control Box to the Motor

From the optional items, you can choose:

• Infrared safety sensor(s) recommended for better safety. Minimum one set required when choosing automatic closing    operation (oppose to open/stop/close mode)
• Digital Wireless Keypad with 3 codes, or wired Keypad Elite with 500 codes, backlight and other features
• Automatic electric Lock for better security, and its flexible cable protector
• External Antenna for better reception range
• Garage door controller to control a garage door with the gate’s remote-control unit

   For the following optional items, you will need additional cables:

• For safety infrared sensors: minimum 4 wires; “security cable” recommended
• For Electric Lock: 2x0.75mm flexible wires, recommended double shield cable no more than 6mm external diameter
• you can choose the “Flexible Cable Protector” for the lock cabling

From the optional items, you can choose

• Infrared safety sensor(s) recommended for better safety.
• Minimum one set required when choosing automatic closing operation (oppose to open/stop/close mode)

Warranty

• This Kit comes with 3 years warranty on the motor and main control board. the warranty applied automatically, no need for registration.
• For more details see our “Warranty Terms”, and the “Terms and Conditions”.

The above is recommendation only

• It is the buyer responsibility to get the suitable configuration and the correct installation
• Please contact us for more information and for help with getting installer around your area.

 The Ram 5 boasts many innovative features, including a slow-down facility on opening and                      closing, obstacle detection to ensure safety, secondary safety input for additional photo cells or                    safety- edges, and has partial opening for pedestrian use.

Made in Italy, the home of gate automation, the RAM-5 Kit is a stylish and modern system. it can              easily move gate leaf up to 250Kg in weight and 5 meters in length. The system is very easy to                    program thanks to its automatic program function.

 Why should I choose this system

• Reliable: mechanical parts completely made in Italy and
• Quick motor release for emergency gate release with a key supplied with the motor
• Maximum strength: the helical gears are built with internal involving teeth

System features

• Extra safe thanks to the low-voltage connections 24V, the safety accessories and the automatic obstacle detection feature
• Auto-programming: automatically calculates the most suitable operating parameters for your gate
• PWM electronic technology (Pules Width Modulation) controlling the gate travel speed, and smoothing the motion.
• Adjustable automatic closing delay (Pause)
• Internal antenna and receiver included within the control box
• Tool-free, remote-control units programming (this feature can be blocked in some models, please ask needs to be blocked)
• Up to 180 Remote control units, or more with extended memory
• Wings synchronization adjustment (for Double swing gates only)
• Obstacle sensitivity adjustment