The wireless push button Unit, including wireless transmitter, allowing installation without any wiring.

The unit based on the CLIPSAL IP66 enclosure and industrial push button.

The unit is completely weatherproof

The unit measurements are 82 x82mm depth: 70mm

The unit powered by batteries with life time of about 2 years – we recommending replacing the batteries every 12 -18 month.

The unit will work for a distance of up to 50M depends on the installation site.

If longer range required, install it on insulation surface as plastic / wood, metal, and some time bricks can reduce the reception to 10 -20meters only, which is usually good enough as those units installed not far from the gate.

The unit supplied with replacement batteries.

For Setup the unit to open your gate system; refer to adding new remote control to the system. It is the exactly same way. You will find it in the programing instructions of your system (you can download form the “manuals” tab at the shop website



  1. If programing needs to be done in the motor/ control unit – it should be done by KingGates technician
  2. If form any reason, you cannot program the unit yourself, technician call out fee may apply


Shipping Weight 2.3490kg
Shipping Width 0.085m
Shipping Height 0.090m
Shipping Length 0.085m