This Kit is sutable for KinGates system with main control unit D124 and D224 (for G8 conrol unit use backup 3 Kit          BKUP-3-KG)


  1. One (1) Charger BAT K2 GEL
  2. Two (2) 1.3 AMP Batteries
  3. One (1) Set bridging wires with terminals and plugs for this ready to use kit

This kit is for fitting with the following installation configurations:

  1. Sliding gate Dynamo – in the motor unit
  2. Double swing Gate Modus – in the “slave” motor, 4 wires needed between the motors

Notes: if no wires or you want to use better batteries; you may use the Lithium Ion backup set.

This set can be installed in the “master” motor and not nee for extra wires between the motors, only 2 wires to power the motor itself


Shipping Weight 1.3340kg
Shipping Width 0.130m
Shipping Height 0.090m
Shipping Length 0.155m